Documents matching your search: 15 [shown 10]
- Electron Beam Welding
Accordance to query: 25.14%
Fragments of message :
... As developments continued, two basic designs evolved: the low-voltage electron beam system , which uses accelerating voltages in 30 kV to 60 kV range and the high-voltage system with accelerating voltages in the 100 kV range...
More: http://euwelding.com/post_1202075926.html
... The higher voltage system emits more X-rays than the lower voltage system...
... These are the electron beam gun , the power supply with controls, and a vacuum work chamber with work-handling equipment... - Robotic Welding System for medium- and small-sized parts
Accordance to query: 18.41%
Fragments of message :
... The Robotic Welding System features the latest technology from Lincoln Electric and FANUC Robotics, including: Lincoln Electric Power Wave® i400 and AutoDrive(TM) 4R90 robotic system FANUC ArcMate 100iC robot arm , which provides high speed, six axes for maximum flexibility Servo-driven positioners that are nearly maintenance-free with no mechanical components to fail such as cylinders, brakes, controls, etc...
More: http://euwelding.com/post_1219811855.html
... The control panel delivers push-button controls for ease of operation and large roll away side doors for easy programming...
... PC board safety controls and integrated operator safety devices provide additional protection... - Arc welding Power supplies
Accordance to query: 17.75%
Fragments of message :
... The most common classification is constant current power supplies and constant voltage power supplies...
More: http://euwelding.com/post_1200289717.html
... In arc welding , the length of the arc is directly related to the voltage, and the amount of heat input is related to the current...
... Constant current power supplies are most often used for manual welding processes such as gas tungsten arc welding and shielded metal arc welding , because they maintain a relatively constant current even as the voltage varies...
... This is important because in manual arc welding , it can be difficult to hold the electrode perfectly steady, and as a result, the arc length and thus voltage tend to fluctuate...
... Constant voltage power supplies hold the voltage constant and vary the current, and as a result, are most often used for automated welding processes such as gas metal arc welding , flux cored arc welding , and submerged arc welding... - CNC punching, laser cutting, bending demonstrated
Accordance to query: 15.53%
Fragments of message :
... Precise bending every time is assured by the Automatically Controlled Bending a system that has potentially up to eight sensors...
More: http://euwelding.com/post_1203436391.html
... As a result it can handle a wide product range up to a maximum weight of 40kg...
... The TruBend and BendMaster are operated by a single control and jointly programmed by the dedicated TruTops Bend software...
... The high productivity of this machine has been achieved through faster processing and tool rotation, additional drives and faster acceleration thanks to lighter weight components, said Trumpf... - New international welding standard designed to ease stresses
Accordance to query: 10.35%
Fragments of message :
... this means that welding normally requires continuous control and that specified procedures be followed...
More: http://euwelding.com/post_1202077031.html
... The ISO 3834 standard concerning quality requirements in welding has been specifically prepared to identify the controls and procedures required to produce welds of a quality level acceptable to the end- user of the product...
... He says that welding is a unique process in that the final result cannot be verified by testing only, but that the quality of the finished product is incorporated in the entire process thorough a continuously monitored control system, which follows specific procedures... - Welding and cutting automation to be exhibited
Accordance to query: 7.89%
Fragment of message :
... It uses either three or four "SmartMotors", two precision gearboxes and integrated arc voltage torch height control system...
More: http://euwelding.com/post_1203435237.html - Ignition of a thermite reaction
Accordance to query: 1.97%
Fragments of message :
... It is possible to start the reaction using a propane torch if done correctly...
More: http://euwelding.com/post_1202072228.html
... The torch can preheat the entire pile of thermite which will make it explode instead of burning slowly when it finally reaches ignition temperature... - Thermit reaction details
Accordance to query: 1.97%
Fragments of message :
... To produce an alloy of the correct composition, alloys like ferro-manganese are added to the mixture along with pieces of mild steel, both as small particles, to allow rapid dissolution in the molten iron, to control the temperature and to increase the "metal recovery"...
More: http://euwelding.com/post_1202074470.html
... The procedure of "controlled localized reaction" to keep the thermit mixture ignition under control was invented by Dr Goldschmidt and hence the process is sometimes also known as the Goldschmidt process... - Thermit welding method for rail joints
Accordance to query: 0.49%
Fragment of message :
... Thereafter, the crucible and torch stands are removed...
More: http://euwelding.com/post_1202076065.html - Laser Welding System: manually or under full CNC
Accordance to query: 0.49%
Fragment of message :
... All parameters are easily adjusted using the multi-function joystick and the large colour touch screen...
More: http://euwelding.com/post_1202897741.html